Thermal Bonding

In order to perform thermal bonding of the fibrous web structures there is a prerequisite that must be met. Fibrous web must include thermoplastic fibers or at least thermoplastic powders. Most commonly used thermoplastic fibers are polypropylene, polyester, nylon, polyethylene and some others. This method is applied generally to high loft structures to get homogenous bonding. In impingement method (another name for through – air bonding), web is transported to the oven and from the nozzles hot air is impinged to the web surface and bonding formation is occurred. As it may be guessed, in this method the bonding efficiency on the surface can be good while it is very few, even close to zero, in the depth of the web.

We have 1 line for Thermal Bonding upto 120″ width.
GSM range from 40~2000.